Search | R107

Displaying 1 - 50 of 588
On Demand Video
Cleaning and Detailing a Mercedes Engine Compartment- On Demand Video Instruction
$4.99

Extreme Detailing Part 4: Cleaning and Detailing an Engine Compartment Safely - On Demand Video

Kent will show you how to get it super clean with minimal water and overspray

In this 14-minute video instruction, you will get to see how Kent cleans and details an engine compartment in a W210 E430 using his favorite chemicals and techniques. This includes using less than a gallon of water and controlling the spray rinse so you protect sensitive electrical components.

On Demand Video
$19.99

Door Hinge and Latch Lubrication Procedures - On Demand Video

With the right grease gun and lubricants you can make your doors close oh so smoothly!

Door hinge lubrication has to be one of the most neglected maintenance items on the older models. I think part of the problem stems from the fact owners don't know how to do it or don't know how to acquire the proper grease gun to lubricate those special fittings on the door hinges.

$99.75

Complete Lubrication Kit w/ Applicators in Carrying Case

Revised May 18, 2024 to now include Kent's Miracle Lube. This is your grab-n-go for all your lubrication needs on your older Benz

If you own and maintain an older car (especially 15 years and older) you must be willing to take care of its lubrication needs or you may spend big money later in repairs.

$46.95

Door Hinge Complete Lube Kit w/ Video Instructions

Do not neglect the door hinges and latches on your older Benz

Ever wish you could find a good way to lube the door hinges on your old Benz? Maybe you have seen that little fitting wondering what it is, or maybe you have heard there is a special grease gun that can inject grease into that fitting?

$3.85

Windshield Washer Squirt Nozzle Cleaning and Adjusting Tools

2 wire tool set - One to clean and one to adjust - watch video below for details

Are you tired of windshield washers sprayers that done spray straight or don't spray at all. If you can hear the pump running but no fluid is coming out the nozzles it could be the nozzle holes are plugged with dirt.

$14.75

Hirschmann Power Antenna Mast Cleaning and Lubrication Kit

Extend the life of your power antenna by cleaning and regular lubrication

"I have heard some owners complain about the unreliability of those older Hirschmann power antennas. I would say that in at least 80 percent of the few hundred antennas I have taken apart that went bad - the reason was lack of lubrication!

$84.50

DELUXE Windshield Fine Scratch Removal and Glass Deluxe Polishing Kit w/ Power Tool

WARNING! Not guaranteed to work on all scratches. WILL NOT WORK ON SAND PITS. Do finger test on wiper scratches BEFORE ordering!!! Read and see more below.

Contains all supplies and video instructions you need - including a high speed power multitool to remove very fine scratches. Purchase together and save $$$$. Ever wish you could get rid of the annoying wiper scratches on your front windshield (or rear hatch glass if you have a rear wiper)?

$49.95

Windshield Fine Scratch Removal and Glass Polishing Kit

WARNING! Not guaranteed to work on all scratches. WILL NOT WORK ON SAND PITS. Do finger test on wiper scratches BEFORE ordering!!! Read and see more below.

Contains all supplies and video instructions you need - except a multitool (see description. )Ever wish you could get rid of the annoying wiper scratches on your front windshield (or rear hatch glass if you have a rear wiper)?

On Demand Video
$15.99

How to Remove Fine Scratches from Your Car's Windshield - On Demand Video

Video instructions using Kent's glass polish kit to remove scratches with less mess and less heat!

This video will take you step by step through the process of using our glass polish kit with a multitool to remove those fine scratches from your windshield or rear hatch glass. It also works great for polishing the water and acid rain out of any glass, including shower doors!

$8.95

Anti Corrosive Gel for Magnesium and Aluminum

For protecting clean and bare aluminum and magnesium engine parts

Kent has been working a long time to find a way to stop the ugly corrosion on aluminum and magnesium engine parts. Particularly valve covers and intake manifolds.

On Demand Video
$2.00

How to Clean Out Plugged Sunroof Drains on 1965 to 1995 Models

Part of Kent's $2 tip video collection. The tip will only cost $2 but you could save considerable money and grief by watching this video.

In this short 2:32 minute video Kent will show you how he first tests the sunroof drains for blockage and then how he goes about cleaning out any blockage.

$30.99

Gas Engine Spins But Won’t Start - Video Class with Kent Bergsma

Watch all seven videos in this series - and learn how to get your gas Mercedes starting and idling better.

Too many emails on this subject pretty much forced Kent to do this almost 3 hour long video class. If you are having problem starting your old 1976 to 1993 Mercedes with Bosch C.I.S. fuel injection this is a must see.

On Demand Video
$9.99

How to Use Kent's New Instrument Cluster Removal Tools - On Demand Video

Tips and tricks to get those stubborn clusters out of the dash

This video is free with the purchase of Kent's new dash cluster pull tool set. If you just want to see how he uses the tools and some tricks to get difficult clusters out you are welcome to purchase this video separately.  Approximate run time is 20 minutes.

$332.00

1980 to 1985 380SL 380 SLC Steering Lock w/ Tumbler and Keys - NEW

Now with 2 matching high-security keys. Steering locks are in short supply, and reports they will not be made again.

We have been informed that there is no plan to manufacture new steering locks again for these classic cars. This will also fit the European R107 280SL.

$34.75

R107 W116 W123 W126 W201 W124 R129 W140 Instrument Cluster Removal Tools

With Free Video Instructions - For most models from 1972 to 1999

Removing a Mercedes instrument cluster from any of the chassis listed is easy with these special "pull" tools. Many owners do not realize that the instrument cluster is just pushed into the dash panel and not held in with any bolts or screws.

On Demand Video
$14.99

Replacing and Servicing Screw Cap Style Ignition Key Tumbler Assemblies - On Demand Video

For select models 1975 to 1989. With the right tools and knowledge you can do this yourself sitting in the car!

This video is not only going to show you how to remove and replace the “screw cap” style tumbler, but it also going to explain the theory of operation and how to avoid certain pitfalls when doing this job yourself. And YES, there are pit falls.

$39.50

Screw Cap Style Ignition Tumbler Service and Replacement Tool Kit

Do tumbler service and replacement inside the car with Kent's custom tools and FREE detailed VIDEO instructions

If you have been around old Mercedes for any length of time, you have probably run into a problem with your ignition key starting to "stick" or one that would not turn.  This problem can leave you stranded and could cost hundreds of dollars to fix $$$.

On Demand Video
Mercedes Muffler Repair - On Demand Video
$12.99

Center and Rear Muffler and Exhaust Pipe Replacement and/or Repair - On Demand Video

Common Rear Exhaust leak troubleshooting, component replacement and hole patching DIY techniques

How can you tell if you have a hole or leak in your exhaust system? What are the symptoms? Can the leak be patched? When will you have to get either a new center muffler or rear muffler or pipes or all three? Can you replace the mufflers yourself and what are the tricks?

$29.50

Custom Made Large Angled Head Clamping Tool

Multiple uses for hose removal, assembly, and holding parts safely for cleaning and polishing.

This is one of Kent's favorite tools around his shop. It is used almost daily. The tool rose out of a need to be able to safely hold fuel inectors while cleaning when with a large high speed wire wheel. No tool like this is availabe so it had to be built in our shop!

On Demand Video
Dragging Brake Dust - On Demand Video
$9.99

Testing for and Troubleshooting Causes of Dragging / Sticking Brakes - On Demand Video

Could be multiple causes - don't assume it is a bad caliper!

Old cars and brake issues go hand in hand. Especially if the car is not driving very often. Brake problems usually first show up as “dragging” or sticking brakes. If this issue is not dealt with immediately it can lead to serious problem including the car catching on fire. 

 

On Demand Video
$5.99

No Cost Steps to Fixing an Engine's High Idle Speed Problem - On Demand Video

Kent is always amazed at how often it is the simple things! You won't believe how easy it was to fix this engine!!

This video will be an excellent example of how to save big $$$ doing the work on your own car. If your gas engine is idling too fast in neutral it could be an expensive problem, but in many cases it is due to lack of maintenance over a long period of time.

$213.00

Late W113, W108, W109, Early R107, Some W114 and W115 Brake Master Cylinder

LAST ONE. Please study application notes below: Some chassis are year specific - others are vin number specific - Free master cylinder bleeder kit and complete 30 minute video instructions.
Comes with Kent's full on-demand video on removal, installation and bench bleeding procedure. Brand new brake master cylinder for most of the later 1960's and early 1970's models.
$31.95

Plastic Radiator Broken Upper Neck Repair Kit

This will repair most cracked or broken upper radiator necks - Free video instructions

Another great solution from Mercedessource!

1978 to 1995 Mercedes only

A broken radiator neck can be safely repaired if it breaks off cleanly in the center or aft of the center of the neck. If it breaks off too close to the tank or breaks off in multiple small pieces then we advise that you replace the radiator.

$79.95

2 Quarts of Miracle Paint with Spare Empty Pint Can

Cost saving option when tackling some major rust repair
If you are working on some larger rust areas or rust holes, you will probably need more than one quart to complete your project. This two-quart kit will generally cover and seal all areas if you are doing a rust cleanup on the underside of the car.
On Demand Video
Under Body and Under Trim Spot Rust Repair - On Demand Video
$12.99

Under Body and Under Trim Spot Rust Repair - On Demand Video

High moisture "hidden" rust areas have to be treated and coated properly or they will not be permanent

On older Mercedes spot rust can be a hidden problem under side moulding trim, under fenders and rocker panels and inside the bottom edges of doors.

$32.50

Frozen Brake Caliper Piston Removal Pump Adapter Hose

Only works with Mercedessource Injector Pressure Tester - FREE VIDEO INSTRUCTIONS

This is a must-have if you attempting a caliper rebuild on one with stuck pistons. If you own one of our injector pressure testers here is a great add-on that will allow you to use the tester to remove stuck pistons from old brake calipers.

On Demand Video
Mercedes Brake Caliper Removal - On Demand Video
$6.99

Brake Caliper Rebuilding Part 1: How to Remove Frozen Pistons From Brake Calipers - On Demand Video

Part 1 of 3 Parts: For Mercedes brake calipers from the early 1960's to the late 1990's

You can save a lot of money if you can rebuild your old brake calipers, especially on some older models. If you can just get the pistons out of the housings, most calipers are rebuildable, unless they have been subject to road salt or have sat exposed to the weather for years without use.

On Demand Video
Mercedes Front Rotor Removal - On Demand Video
$3.99

Removing the Front Brake Rotor from the Bearing Hub - On Demand Video

Kent will show you some tips on how to remove and replace that front rotor on the older model front hubs

Installing new front rotors on older model Mercedes requires that you remove the rotor from the bearing hub and bolt the new rotor back on. Sounds easy right? Sometimes not! The bolts are on very tight and often take a lot of torque to remove. How do you hold the break rotor while doing this?

On Demand Video
280SEL Transmission Service - On Demand Video
$12.99

Older Automatic Transmission Fluid and Filter Service - On Demand Video

Directly covers most 1960’s Automatics - Indirectly covers 1970’s and Early 1980’s Automatics Directly covers most 1960’s Automatics - Indirectly covers 1970’s and Early 1980’s Automatics

Transmission service on these older Mercedes is very often neglected and it is something you can do yourself. It should be done every 30,000 miles or every 5 years (whichever comes first). After you watch this video you will find out why you should do it yourself!

$29.95

SPECIAL PURCHASE CERAMIC Rear Brake Pads - Most Models 1968 to 1991

FREE CERAMIC BRAKE GREASE. Full set for left and right rear calipers. Fits R107 W108 W109 W111 W113 W114 W115 W116 W123 and W126 chassis - NOT for 201 or 124 Chassis

FITS THE FOLLOWING: all W107, W108, 109, W111, W113, W114, W115, W116, W123 and W126 chassis from 1969 to 1991. See models listed below. NOTE: Four pads included for both sides of rear axle. Tired of excess brake dust and poor performance during heavy braking? These are amazing brake pads.

$210.00

1981 To 1991 W107 W123 W126 Chassis Monovalve Heater Control Valve Assembly - USED

Original working genuine mono valve with new rubber seal repair kit installed. Ready to install on your Benz.

LAST ONE. For all 107, 123, and 126 chassis cars with U.S.-style automatic heater controls. Failure of this part is the most common reason you get inconsistent or erratic heat. This will not work for cars with manual control levers.

$106.50

Anodized Aluminum Window Trim Polish Restoration Kit w/ POWER TOOL

Our popular Miracle Paste kit now shipped with high speed power tool included! ** PLEASE NOTE: CANNOT SHIP INTERNATIONALLY DUE TO CHEMICALS***

Mercedes 108, 109, 114, 115, 116, 107, 123, 126, 124 and 201 chassis window trim has a super strong anodized coating that is impervious to hand polishing but still can oxidize when exposed to harsh environmental elements.

On Demand Video
Mercedes Overvoltage Relay - On Demand Video
$3.99

Solving Rough Idle and Low RPM at startup on a 1986 to 1993 CIS Engine - On Demand Video

Sometimes this can be fixed for very little work and money - but other times NOT..:-)

This is a common occurrence as these gas engines with Bosch C.I.S. fuel injection age. Most of them are now at least 20 + years old. The problem goes something like this. You start the engine cold and it will hardly run. It runs rough and idles very low and will even quit a few times.

On Demand Video
$9.99

How to Properly Install a Foam Hood Pad - On Demand Video

Kent shares all his tips and tricks to get the pad on straight, permanent, and looking good

If you are interested to see how easy it is to install a new hood pad, this video will let you see Kent demonstrate the process step-by-step. If you have purchased one of our hood pad kits, then this video can help you get your new pad lined up and installed properly. 

$42.95

24" Measuring Machinist Straight Edge with Protective Sleeve

A must have when working on engines.

When working on automotive engines a long heavy machinist straight edge is a must. This is the best way to tell if the mating surfaces are flat and true. That includes cylinder heads, engine blocks, intake and exhaust manifolds as well as critical sealing metal to metal covers and housings. 

On Demand Video
$12.99

CIS Gas Fuel Injector Removal, Cleaning and Testing - On Demand Video Manual

How to know for sure how well your gas fuel injectors are performing (1976 to 1993 CIS ONLY)

If you think CIS fuel injectors can just be ignored, think again. Sure, your gas engine will continue to start and run “ok”, but you may find that it is not producing the power it once did nor the fuel mileage it once delivered.

$249.00

CIS Gas Fuel Injector Spray Pattern Tester and Nozzle Cleaner

NEW VERSION 3 release.. See application notes below:

Works on all models from 1977 to 1993 with the Bosch C.I.S Fuel Injection system - see models listed below: Now you can do it yourself on the bench with this inexpensive tester- Save big $$.  Ever wonder how well your old CIS fuel injectors are working?

Pages